Introduction 

When CDAP system services are down, or when dependent services like HBase, HDFS, YARN, Kafka, ZooKeeper, Kerberos, etc are down, user programs and CDAP services must remain running, though they may be in a degraded mode where some operations will fail.

Goals

Define the expected behavior of CDAP programmatic APIs during underlying service failures

Define the expected behavior of CDAP RESTful APIs during underlying service failures

User Stories 

• As an application developer, I want my Service, Flow, Worker, and SparkStreaming programs to remain running when underlying services experience downtime
• As an application developer, I want my Service, Flow, Worker, and SparkStreaming programs to recover to a normal state when underlying service downtime ends
• As an application developer, I want to be able to configure how long my batch programs (Workflow, MapReduce, Spark batch) should retry before eventually failing when underlying services experience downtime
• As a system administrator, I want CDAP system services to remain running when underlying services experience downtime
• As a system administrator, I want CDAP RESTful APIs to return with http code 503 when required underlying services are unavailable
• As a system administrator, I want CDAP system services to recover to a normal state when underlying service downtime ends
• As a system administrator, I want CDAP program run history recording to be unaffected by failover
• As a system administrator, I want all CDAP system services to be highly available

Design

Here we will list out different types of service unavailabilities that may occur, and describe the expected behavior for different types of programs in those situations. In general, unavailability errors that occur when a program is starting up will cause the program to continuously retry startup. Errors that occur in always-running programs will be handled in a way that keeps the program running. Errors that occur in batch programs will be retried for some time before failing the program run.

More specifically, any time a ServiceUnavailableException is not caught by the user program, it is handled by CDAP depending on the context:

CDAP APIs that involve a remote call and that are called in a long transaction (inside a Mapper, Reducer, or Spark program), or not called inside any transaction (methods where explicit transactions are used and the code is not in a TxRunnable), will retry the remote call a configurable amount of time before throwing a ServiceUnavailableException. If the developer does not catch and the exception, CDAP will fail the program run. APIs that involve a remote call are:

DatasetContext.getDataset() (if the cache is not hit)

ServiceDiscoverer.getServiceURL()

SecureStore.listSecureData()

SecureStore.getSecureData()

From a user program's perspective, any method that involves a remote call can throw a ServiceUnavailableException, which extends RetryableException. The program can catch and handle the exception. If it doesn't, CDAP will handle it depending on the context.

CDAP APIs that involve a remote call are:

• DatasetContext.getDataset() (if the cache is not hit)
• ServiceDiscoverer.getServiceURL()
• SecureStore.listSecureData()
• SecureStore.getSecureData()
• Transactional.execute()
• Admin.datasetExists()
• Admin.getDatasetType()
• Admin.getDatasetProperties()
• Admin.createDataset()
• Admin.updateDataset()
• Admin.dropDataset()
• Admin.truncateDataset()
• StreamWriter.write() (only in Workers)
• StreamWriter.writeFile() (only in Workers)
• StreamBatchWriter (only in Workers)
• Table methods
• Location methodsPrograms running Transactional.execute(TxRunnable) will retry running the TxRunnable methods
• PartitionedFileSet methods

If uncaught by the program, CDAP will handle the exception depending on the context it occurs in:

• CDAP APIs that involve a remote call and that are called in a long transaction (inside a Mapper, Reducer, or Spark), or not called inside any transaction (methods where explicit transactions are used and the code is not in a TxRunnable), will be retried a configurable amount of time before it throws throwing a TransactionFailureException with the ServiceUnavailableException as its causeServiceUnavailableException.
• Programs running Transactional.execute(TxRunnable) will throw a RetryableTransactionFailureException. Transactional can be used in:
  • initialize methods using explicit transactions. Causes the run to fail
  • destroy methods using explicit transactions. Causes the run to fail
  • Service endpoint methods using explicit transactions. Causes a 503 to be returnedFlowlet process methods using explicit transactions. Causes the run to fail
  • CustomAction.run(). Causes the workflow run to fail 
  • Worker.run(). Causes the run to fail
  • Note: the method that calls Transactional.execute() cannot be retried because it may involve several transactions, and is therefore not idempotent.
  Programs running their initialize() method with an implicit transaction will retry the method
  • Spark client.
• Programs running their initialize() method will retry a configurable amount of time before failing the program run
• Programs running their destroy() method with an implicit transaction will retry the method a configurable amount of time before failing the program run
• Service programs executing an endpoint method with an implicit transaction will return a 503 error code
• Flowlet programs executing their processEvent method with an implicit transaction will indefinitely retry the process method with its event

Note: this

• Programs that are starting up and that use the `@UseDataSet` annotation will try to get and inject the Dataset for a configurable amount of time before failing the program run

This documents how these APIs should behave. It does not document how they currently behave. JIRAs will be opened for any differences in behavior and fixed.

CDAP System Services

These are various services that CDAP runs, both inside YARN and on edge nodes.

Transaction

• In implicit transactional contexts, transaction start, commit, and rollback operations will fail and be handled by the platform
  • programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times.
  • programs executing their destroy() method will fail the program run.
  • Service programs executing an endpoint method will return a 503 error code
  • Flow programs will indefinitely retry the processEvent method 
  • long transactions (in MapReduce, Spark) will fail the program run after a configurable amount of time
• In explicit transactional contexts (places where the Transactional interface is being used), an ServiceUnavailableException will be thrown. The developer can catch and handle the exception. If it is not caught and handled, the platform will handle the error in the same way that it does in implicit transactional contexts.
• CDAP REST APIs will return a 503
• Metrics Processor will be unable to process metrics
• Log Saver will be unable to save logs

Dataset

• Programs that use the @UseDataSet annotation and that are starting up and that will fail their YARN container. The container will be retried up to a configurable number of times.
• Dataset REST APIs will return 503
• TODO: check if other REST APIs will fail
• Deploy application REST API will fail if the application creates any datasets and return a 503
• DatasetContext.getDataset() that doesn't hit the client cache will throw a ServiceUnavailableException. Dataset methods in Admin (exists, getDatasetType, getDatasetProperties, create, update, drop, truncate) will throw a ServiceUnavailableException. The developer can catch and handle the exception. If it is not caught and handled, the platform will handle it.
  • Programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times
  • Programs executing their destroy() method will fail the program run after a configurable amount of time
  • Executing a TxRunnable using Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause. If the TransactionFailureException is not caught and handled, the program will fail
  • Service programs executing an endpoint method will return a 503 error code
  • Flowlet programs executing their processEvent method will indefinitely retry the method with its event
  • Mapper, Reducer, CustomAction, Worker, and Spark programs will fail their run after a configurable timeout
• Explore queries on datasets will fail
• Dataset operations to create, delete, or modify explore partitions will fail and throw a ServiceUnavailableException. If the developer catches and handles the exception, the platform will not do anything extra. Otherwise:
  • Programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times
  • Programs executing their destroy() method will fail the program run after a configurable amount of time
  • Executing a TxRunnable using Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause. If the TransactionFailureException is not caught and handled, the program will fail
  • Service programs executing an endpoint method will return a 503 error code
  • Flowlet programs executing their processEvent method will indefinitely retry the method with its event
  • Mapper, Reducer, CustomAction, Worker, and Spark programs will fail their run after a configurable timeout

Streams

• Stream REST APIs will return 503
• Deploy application REST API will fail if the application creates any streams and return a 503
• Notifications on stream size will not be sent (shouldn't be triggered anyway since there is no way to write to a stream when this happens)
• StreamWriter methods will throw a ServiceUnavailableException. The developer can catch and handle the exception. If it is not caught and handled, the platform will handle it.
  • StreamWriter is only available in a Worker. Uncaught exceptions will fail the run
• Old Stream files on HDFS will not be cleaned up until the service is restored

Explore

• Explore REST APIs will return with 503
• Queries that are in progress will be lost
• Queries that are in progress of writing data are undefined
• Create dataset operations of Explorable datasets will fail and throw a ServiceUnavailableException. The dataset will not be deleted. If the developer catches and handles the exception, the platform will not do anything extra. Otherwise:
  • If this occurs during application deployment, the application will fail to be deployed
  • If this occurs in a program initialize method, the YARN container will fail and will be retried up to a configurable number of times.
  • If this occurs in a program destroy method, the YARN container will fail and the program will transition to the FAILED state
  • If this occurs in a Flowlet processEvent method, the method will retried indefinitely
  • If this occurs in a Service endpoint method, a 503 error code will be returned
  • If this occurs in a running Mapper, Reducer, CustomAction, Worker, or Spark program, the exception will fail the program run after a configurable timeout
• Dataset operations to create, delete, or modify explore partitions will fail and throw a ServiceUnavailableException. If the developer catches and handles the exception, the platform will not do anything extra. Otherwise:
  • If this occurs in a program initialize method, the YARN container will fail and will be retried up to a configurable number of times.
  • If this occurs in a program destroy method, the YARN container will fail and the program will transition to the FAILED state
  • If this occurs in a Flowlet processEvent method, the method will retried indefinitely
  • If this occurs in a Service endpoint method, a 503 error code will be returned
  • If this occurs in a running Mapper, Reducer, CustomAction, Worker, or Spark program, the exception will fail the program run after a configurable timeout

Metrics

• REST APIs to fetch metrics and logs will fail with 503

Metrics Processor

• Metrics emitted after the outage will not be returned by the REST APIs to fetch metrics
• If the outage lasts longer than Kafka retention, any unprocessed metrics older than the retention will be lost

Log Saver

• Logs emitted after the outage will not be returned by the REST APIs to fetch logs
• If the outage lasts longer than Kafka retention, any log messages older than the retention will be lost

Master

• Namespace, Metadata, Preference, Configuration, Security, Artifact, and Lifecycle CDAP REST APIs will fail with 503 
• Scheduled workflow runs will be missed
• Program state changes will not be recorded. Program state may be incorrect right after service is restored, but will eventually be corrected
• Program run records will not be updated. Run records may be incorrect right after service is restored, but will eventually be corrected
• Programs that are starting but have not yet received their YARN containers will fail
• cluster metrics like memory available and used will not be collected for the time period of the downtime

Auth

• CDAP users will be unable to get a security token

Router

TODO: What service does SecureStore use?

Hadoop Infrastructure

These are various Hadoop systems. Note that an outage in any one of these services will likely have an impact on the CDAP system services as well.

HBase

• DatasetService should return 503, so all degradations in DatasetService will apply here
• Program state will not be recorded. Once service is restored, state will eventually be corrected
  • This should not cause user programs that finish during the outage to fail
• Program run records will not be updated. Once service is restored, state will eventually be corrected
• CDAP REST APIs that lookup, create, modify, or delete a CDAP entity will fail with a 503
  • TODO: are there any APIs that don't fall under this category? fetch logs maybe?
• Metrics still in Kafka will not be processed. If the outage lasts longer than Kafka retention, unprocessed metrics will be lost
• Log messages still in Kafka will not be saved. If the outage lasts longer than Kafka retention, log messages will be lost
• Programs will be unable to start. Scheduled program runs will fail
• Table read operations should throw a ServiceUnavailableException. The user can catch the exception and handle it. Otherwise, the platform will handle it.
  • Note: this includes partition operations on a PartitionedFileSet
  • Programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times
  • Programs executing their destroy() method will fail the program run
  • Executing a TxRunnable using Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause. If the TransactionFailureException is not caught and handled, the program will fail
  • Service programs executing an endpoint method will return a 503 error code
  • Flowlet programs executing their processEvent method will indefinitely retry the method with its event
  • Mapper, Reducer, CustomAction, Worker, and Spark programs will fail their run after a configurable timeout
• Table write operations should throw a ServiceUnavailableException. The user can catch the exception and handle it. Otherwise, the platform will handle it.
  • Note: this includes partition operations on a PartitionedFileSet
  • Programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times
  • Programs executing their destroy() method will fail the program run
  • Executing a TxRunnable using Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause. If the TransactionFailureException is not caught and handled, the program will fail
  • Service programs executing an endpoint method will return a 503 error code
  • Flowlet programs executing their processEvent method will indefinitely retry the method with its event
  • Mapper, Reducer, CustomAction, Worker, and Spark programs will fail their run after a configurable timeout
  • Note: currently, due to the fact that BufferingTable is the Table implementation, writes will only fail when the transaction is committed and not on the actual method call
• TODO: investigate effect on HBase replication 

Notes:

'normal' HBase failures can take a while to recover from. For example, if an HBase regionserver it can take minutes for the master to notice and reassign the regions. This suggest that the default retry timeout should be pretty high.

Timeouts and retries for Tables may be difficult to control, as HTable and HBaseAdmin have their own logic and settings around retries and timeouts based on hbase-site.xml. HTable has a .setOperationTimeout() that it seems to use for most RPC calls it makes, and which defaults to the value of 'hbase.client.operation.timeout' (which in turn defaults to max long value in some versions of hbase). HBaseAdmin also uses this timeout for some operations, like creating a namespace, but for other operations it uses the 'hbase.client.retries.number' setting along with 'hbase.client.pause', and sometimes multiplied by 'hbase.client.retries.longer.multiplier'. The defaults and logic differ between hbase versions.

In the CDAP system services, it may make sense to use smaller timeouts and retries so that operations always return within 10 seconds or so instead of 20 minutes.

HDFS

• Location methods will throw a ServiceUnavailableException. The user can catch the exception and handle it. Otherwise the platform will handle it.
  • Programs executing their initialize() method will fail their YARN container. The container will be retried up to a configurable number of times
  • Programs executing their destroy() method will fail the program run after a configurable timeout
  • Executing a TxRunnable using Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause. If the TransactionFailureException is not caught and handled, the program will fail
  • Service programs executing an endpoint method will return a 503 error code
  • Flowlet programs executing their processEvent method will indefinitely retry the method with its event
  • Mapper, Reducer, CustomAction, Worker, and Spark programs will fail their run after a configurable timeout
• Transaction snapshots will not be saved. If the transaction server dies, transaction state will be lost

YARN

• lots of bad stuff happens
• TODO: fill this out

Kafka

• Programs that emit logs and metrics will buffer their data for some time. After some configurable timeout, metrics and logs will be dropped
• Stream size notifications will not be sent
• Recent, unsaved log messages will not be return by the CDAP REST log endpoints
• If the outage lasts longer than the Kafka retention, log messages and metrics will be lost

ZooKeeper

• All CDAP system services will be undiscoverable. This means all the behavior described in the CDAP services section will apply
• All CDAP REST APIs will return 503
• Any HBase regionserver failures will go unnoticed. If this happens, HBase requests to regions belonging to dead regionservers will fail. See the HBase section for expected behavior in these situations

RESTful APIs

The CDAP REST APIs should always respond, even if that response is a 503.

Many internal changes will be required to ensure that there is error handling in place in case any remote call fails. For example, many internal services create Tables to store metadata. These services must not assume that table creation was successful. Instead, if it failed, they must keep trying to create that table, and in the meantime throw ServiceUnavailableException in their methods that try and use that Table. 

Internal services should also not require underlying infrastructure in order to start up or continue running. For example, the CDAP master today will try and create the default HBase namespace during startup, and will hang for a long time if HBase is down. 

HA

Most system services are already scalable to multiple instances (explore is not). Need to verify that if one instance dies, it is re-launched correctly. Making the Explore service HA is a significant amount of work. 

Program state transition is also handled in memory in app fabric, (we add a Listener to the program controller), which means state transition logic will not be run if programs are started with one master, then the master fails over before the run finishes. (CDAP-2013)

API changes

New Programmatic APIs

There will be a new ServiceUnavailable exception that relevant methods will throw. It will be a RuntimeException.

Deprecated Programmatic APIs

No programmatic APIs will be deprecated

New REST APIs

No new REST APIs will be introduced

Deprecated REST API

No REST APIs will be deprecated

CLI Impact or Changes

• None

UI Impact or Changes

• None

Security Impact 

CDAP should make sure tokens are handled correctly if Kerberos ever does down

Impact on Infrastructure Outages 

Should make CDAP resilient to infrastructure outages

Test Scenarios

It is difficult to test all possible scenarios. A few are listed below and more will be added. It would be good if we could run the long running tests in combination with a chaos monkey.

Create a flow that generates the ordered sequence of integers up to some number, and writes them to a Table.

Start the flow, then restart cdap-master.

The output table should contain all generated numbers,

and run history should be recorded correctly.

Configurable Retries

Lifecycle Methods

Consider the following code for a lifecycle method that run at the end of a mapreduce job and writes to a Table dataset some metadata for each new output partition:

public class MyMapReduce extends AbstractMapReduce {

  @TransactionPolicy(TransactionControl.IMPLICIT)
  @Override
  public void destroy() {
    MapReduceContext context = getContext();
    String programName = context.getSpecification().getName();
    Table outputMeta = context.getDataset("output");
    Set<PartitionKey> newOutputPartitions = getOutputPartitions();
    for (PartitionKey key : newOutputPartitions) {
      outputMeta.put(getRowKey(key), getPartitionMetadata(key));
    }
  }

This method can be retried by CDAP because it is idempotent. For methods like this, it would be desirable to have the platform retry the method, especially since a service outage can easily last longer than a short transaction timeout. Since there is no way for CDAP to know what methods are idempotent, it is up to the user to configure the amount of time to retry. One option would be to add a RetryPolicy annotation for the method. For example:

@TransactionPolicy(control = TransactionControl.IMPLICIT)
@RetryPolicy(strategy = RetryPolicy.Strategy.FIXED_DELAY, timeout = 180000, baseDelay = 10000)
@Override
public void destroy() {
  MapReduceContext context = getContext();
  String programName = context.getSpecification().getName();
  Table outputMeta = context.getDataset("output");
  Set<PartitionKey> newOutputPartitions = getOutputPartitions();
  for (PartitionKey key : newOutputPartitions) {
    outputMeta.put(getRowKey(key), getPartitionMetadata(key));
  }
}

This would tell CDAP to retry the destroy() method for 3 minutes if it throws a RetryableException.

Now consider some similar code that adds several output partitions at the end of the job, but adds each partition in its own transaction in order to avoid transaction timeouts when there are many output partitions:

@TransactionPolicy(TransactionControl.EXPLICIT)
@Override
public void destroy() {
  MapReduceContext context = getContext();
  final String programName = context.getSpecification().getName();
  PartitionedFileSet output;
  long startTime = System.currentTimeMillis();
  while (System.currentTimeMillis() - startTime < 180000) {
    try {
      output = context.getDataset("output");  // remote call
      break;
    } catch (RetryableException e) {
      TimeUnit.SECONDS.sleep(1);
    }
  }
  if (output == null) {
    throw new RuntimeException("Unable to get output dataset after 3 minutes");
  }

  Set<PartitionKey> newOutputPartitions = getOutputPartitions();
  for (final PartitionKey key : newOutputPartitions) {
    long startTime = System.currentTimeMillis();
    boolean succeeded = false;
    while (System.currentTimeMillis() - startTime < 180000) {
      try {
        context.execute(new TxRunnable() { // remote call
          @Override
          public void run(DatasetContext context) throws Exception {
            output.addPartition(key, getPartitionPath(key)); // remote call
          }
        });
        succeeded = true;
        break;
      } catch (RetryableTransactionFailureException e) {
        TimeUnit.SECONDS.sleep(1);
      } catch (TransactionFailureException e) {
        throw new RuntimeException(e);
      }
    }
    if (!succeeded) {
      throw new RuntimeException("Unable to add metadata after 3 minutes");
    }
  }
}

The destroy() method is no longer idempotent because it starts multiple transactions, which means you would not want to configure CDAP to retry this method. Instead, the developer is forced to add their own retry logic around every remote call. This, however, makes the code very messy, and requires similar logic to be present in every single user program. In these situations, it would be desirable for CDAP to handle the retries for the getDataset() call, and also for the execute() call.

Option 1 (not chosen)

We could extend the annotation idea to apply to all remote calls within a method. Then the code would look like:

@TransactionPolicy(TransactionControl.EXPLICIT)
@RetryPolicy(strategy = RetryPolicy.Strategy.FIXED_DELAY, timeout = 180000, baseDelay = 10000)
@Override
public void destroy() {
  MapReduceContext context = getContext();
  final PartitionedFileSet output = context.getDataset("output");  // remote call

  Set<PartitionKey> newOutputPartitions = getOutputPartitions();
  for (final PartitionKey key : newOutputPartitions) {
    try {
      context.execute(new TxRunnable() { // remote call
        @Override
        public void run(DatasetContext context) throws Exception {
          output.addPartition(key, getPartitionPath(key)); // remote call
        }
      }
    } catch (TransactionFailureException e) {
      throw new RuntimeException(e);
    }
  }
}

The retry policy would then apply to all remote calls within the method, which are the getDataset() call and to the execute() call. It would not, however, apply to the addPartition() call, though TxRunnable's run() method could also be annotated if desired. This does make things confusing, since it is hard to tell what the retry policy applies to and seems to suggest that the entire destroy() method will be retried instead of the getDataset() and execute() methods.

Option 2 (not chosen)

Another option would be to add methods for each remote call to take a RetryPolicy as an argument. For example:

@TransactionPolicy(TransactionControl.EXPLICIT)
@Override
public void destroy() {
  RetryPolicy retryPolicy = RetryPolicy.fixedDelay(3, TimeUnit.MINUTES, 10, TimeUnit.SECONDS);
  final PartitionedFileSet output = getContext().getDataset("output", retryPolicy);  // remote call
  Set<PartitionKey> newOutputPartitions = getOutputPartitions();
  for (final PartitionKey key : newOutputPartitions) {
    try {
      context.execute( // remote call
        new TxRunnable() {
          @Override
          public void run(DatasetContext context) throws Exception {
            output.addPartition(key, getPartitionPath(key)); // remote call
          }
        },
        30, retryPolicy);
    } catch (TransactionFailureException e) {
      throw new RuntimeException(e);
    }
  }
}

This would remove the ambiguity, and would also indicate to users which methods involve remote calls and which ones do not. However, this is a little more verbose and also adds a lot of clutter to the CDAP APIs, especially as APIs evolve and more parameters are added to various methods.

Option 3 (chosen)

An alternative to this would be to let the cluster admin set a program wide retry policy by setting preferences and runtime arguments. In the future, we may add an ability to configure a custom policy programmatically, but the first release will only support runtime arguments. This parallels what is done for setting short transaction timeouts through runtime arguments.  If none is set, a default will be used, depending on the program type. These defaults will be configurable through cdap-site.xml.

In situations where a developer really wants to control over retries for specific calls, they can set the retry policy to none, and handle the retry logic in their code.

MapReduce/Spark

Consider the following MapReduce code:

@Override
public void initialize() throws Exception {
  MapReduceContext context = getContext();
  Job job = context.getHadoopJob();
  job.setReducerClass(PerUserReducer.class);
  context.addInput(Input.ofDataset("purchases"), PurchaseMapper.class);
  context.addOutput(Output.ofDataset("history"));
}

In this example, the MapReduce job reads from an ObjectMappedTable called "purchases" and writes to a custom dataset called "history". This means that all the code handling retries and timeouts is located in the datasets and not in this program. This means all system datasets must be aware of the retry policy for the program, and apply it to the relevant methods. Setting a 3 hour timeout at configure time will tell the ObjectMappedTable to retry its scan operations for 3 hours while reading data in the map reduce job.

Spark would work in a similar way, with the .fromDataset() and saveAsDataset() being analogous to the addInput() and setOutput() methods in MapReduce. 

Workers

Workers use explicit transaction control for their run method. If a RetryableException is not handled by the user code, the run will fail.

UseDataSet

Fields annotated with the UseDataSet annotation will be injected by the CDAP platform when the class is being instantiated. This amounts to a getDataset() call made by the CDAP framework during instantiation.  If the dataset service is not available when this happens, it would be desirable to retry some amount of time before failing.  The program remote retry policy will be used for this timeout.

Summary

A retry policy for CDAP internal remote calls can be configured per program run using preferences and runtime arguments.

CDAP System Service Failures

These are various services that CDAP runs, both inside YARN and on edge nodes. This section documents what service degradations are expected if various CDAP system services are not available.

Transaction

• Transactions cannot be started or committed.
• In contexts where a long transaction is used (MapReduce, Spark), 
  • transaction start will be retried for a configurable amount of time before the run is failed
  • transaction commit will be retried for a configurable amount of time before the run is failed
• In methods where a short transaction is used:
  • any transaction failure in a Service method will cause a 503 to be returned
  • transaction start failures in a flowlet will be retried indefinitely
  • transaction commit failures in a flowlet will cause the process method to be retried
  • transaction start failures before an initialize() or destroy() method will be retried for a configurable amount of time before causing the program to fail
  • transaction commit failures after an initialize() or destroy() method will cause the method to throw a ServiceUnavailableException. If uncaught, the program will fail
  • transaction start failures in Transactional.execute() will retry transaction start a configurable amount of time before throwing a TransactionFailureException with the ServiceUnavailableException as its cause
  • transaction commit failures in Transactional.execute() will throw a TransactionFailureException with the ServiceUnavailableException as its cause
• CDAP REST APIs will return a 503
• Metrics Processor will be unable to process metrics
• Log Saver will be unable to save logs

Dataset

• Programs that use the @UseDataSet annotation and that are starting up and that will fail their YARN container. The container will be retried up to a configurable number of times.
• Dataset REST APIs will return 503
• Deploy application REST API will fail if the application creates any datasets and return a 503
• TODO: check if other REST APIs will fail
• Explore queries on datasets will fail
• See Programmatic APIs section. Applies to:
  • DatasetContext.getDataset() (if the cache is not hit)
  • ServiceDiscoverer.getServiceURL()
  • SecureStore.listSecureData()
  • SecureStore.getSecureData()
  • Admin.datasetExists()
  • Admin.getDatasetType()
  • Admin.getDatasetProperties()
  • Admin.createDataset()
  • Admin.updateDataset()
  • Admin.dropDataset()
  • Admin.truncateDataset()

Streams

• Stream REST APIs will return 503
• Deploy application REST API will fail if the application creates any streams and return a 503
• Notifications on stream size will not be sent (shouldn't be triggered anyway since there is no way to write to a stream when this happens)
• StreamWriter methods will throw a ServiceUnavailableException. The developer can catch and handle the exception. If it is not caught and handled, the platform will handle it.
  • StreamWriter is only available in a Worker. Uncaught exceptions will fail the run
• Old Stream files on HDFS will not be cleaned up until the service is restored
• See Programmatic APIs section. Applies to:
  • StreamWriter.write() (only in Workers)
  • StreamWriter.writeFile() (only in Workers)
  • StreamBatchWriter (only in Workers)

Explore

• Explore REST APIs will return with 503
• Queries that are in progress will be lost
• Queries that are in progress of writing data are undefined
• See Programmatic APIs section. Applies to the following methods if the dataset referenced is explorable:
  • Admin.createDataset()
  • Admin.updateDataset()
  • Admin.dropDataset()
  • Admin.truncateDataset()
  • PartitionedFileSet.addPartition()
  • PartitionedFileSet.dropPartition()

Metrics

• REST APIs to fetch metrics and logs will fail with 503

Metrics Processor

• Metrics emitted after the outage will not be returned by the REST APIs to fetch metrics
• If the outage lasts longer than Kafka retention, any unprocessed metrics older than the retention will be lost

Log Saver

• Logs emitted after the outage will not be returned by the REST APIs to fetch logs
• If the outage lasts longer than Kafka retention, any log messages older than the retention will be lost

Master

• Namespace, Metadata, Preference, Configuration, Security, Artifact, and Lifecycle CDAP REST APIs will fail with 503 
• Scheduled workflow runs will be missed
• Program state changes will not be recorded. Program state may be incorrect right after service is restored, but will eventually be corrected
• Program run records will not be updated. Run records may be incorrect right after service is restored, but will eventually be corrected
• Programs that are starting but have not yet received their YARN containers will fail
• cluster metrics like memory available and used will not be collected for the time period of the downtime

Auth

• CDAP users will be unable to get a security token

Router

• All CDAP REST APIs will fail
  
  

TODO: What service does SecureStore use?

Hadoop Infrastructure

This section documents expected degradation when various Hadoop systems are down. Note that an outage in any one of these services will likely have an impact on the CDAP system services as well.

HBase

• DatasetService should return 503, so all degradations in DatasetService will apply here
• Program state will not be recorded. Once service is restored, state will eventually be corrected
  • This should not cause user programs that finish during the outage to fail
• Program run records will not be updated. Once service is restored, state will eventually be corrected
• CDAP REST APIs that lookup, create, modify, or delete a CDAP entity will fail with a 503
  • TODO: are there any APIs that don't fall under this category? fetch logs maybe?
• Metrics still in Kafka will not be processed. If the outage lasts longer than Kafka retention, unprocessed metrics will be lost
• Log messages still in Kafka will not be saved. If the outage lasts longer than Kafka retention, log messages will be lost
• Programs will be unable to start. Scheduled program runs will fail
• See Programmatic APIs section. Applies to:
  • DatasetContext.getDataset() (if the cache is not hit)
  • Admin.datasetExists()
  • Admin.getDatasetType()
  • Admin.getDatasetProperties()
  • Admin.createDataset()
  • Admin.updateDataset()
  • Admin.dropDataset()
  • Admin.truncateDataset()
  • PartitionedFileSet methods
  • Table get and scan methods
  • Due to the usage of BufferingTable, Table put and increment methods won't throw exceptions. HBase unavailability will only be seen by the CDAP platform when a transaction is committed.
• TODO: investigate effect on HBase replication 

Notes:

'normal' HBase failures can take a while to recover from. For example, if an HBase regionserver it can take minutes for the master to notice and reassign the regions. This suggest that the default retry timeout should be pretty high.

Timeouts and retries for Tables may be difficult to control, as HTable and HBaseAdmin have their own logic and settings around retries and timeouts based on hbase-site.xml. HTable has a .setOperationTimeout() that it seems to use for most RPC calls it makes, and which defaults to the value of 'hbase.client.operation.timeout' (which in turn defaults to max long value in some versions of hbase). HBaseAdmin also uses this timeout for some operations, like creating a namespace, but for other operations it uses the 'hbase.client.retries.number' setting along with 'hbase.client.pause', and sometimes multiplied by 'hbase.client.retries.longer.multiplier'. The defaults and logic differ between hbase versions.

In the CDAP system services, it may make sense to use smaller timeouts and retries so that operations always return within 10 seconds or so instead of 20 minutes.

HDFS

• Transaction snapshots will not be saved. If the transaction server dies, some transaction state will be lost
• HBase relies on HDFS and will be unavailable. Everything under HBase applies here.
• All REST APIs will return 503
• See programmatic APIs section. Applies to all APIs.

YARN

• All REST APIs will return 503
• CDAP system services should be re-launched once YARN returns
• User programs that were running when YARN died should be re-launched once YARN returns
• TODO: what happens to running java processes? Do they keep running as zombies?
• If YARN is down longer than the Kafka retention, unprocessed metrics and unsaved log messages will be lost

Kafka

• Programs that emit logs and metrics will buffer their data for some time. After some configurable timeout, metrics and logs will be dropped
• Stream size notifications will not be sent
• Recent, unsaved log messages will not be return by the CDAP REST log endpoints
• If the outage lasts longer than the Kafka retention, log messages and metrics will be lost

ZooKeeper

• All CDAP REST APIs will return 503, since CDAP services will be undiscoverable
• See programmatic APIs section. All APIs apply, since CDAP services will be undiscoverable
• Any HBase regionserver failures will go unnoticed. If this happens, HBase requests to regions belonging to dead regionservers will fail. See the HBase section for expected behavior in these situations

Kerberos

• TODO: investigate what happens here. Probably won't be able to start programs and some might expire and die, in which case we should continuously relaunch?

RESTful APIs

The CDAP REST APIs should always respond, even if that response is a 503.

Many internal changes will be required to ensure that there is error handling in place in case any remote call fails. For example, many internal services create Tables to store metadata. These services must not assume that table creation was successful. Instead, if it failed, they must keep trying to create that table, and in the meantime throw ServiceUnavailableException in their methods that try and use that Table. 

Internal services should also not require underlying infrastructure in order to start up or continue running. For example, the CDAP master today will try and create the default HBase namespace during startup, and will hang for a long time if HBase is down. 

API changes

New Programmatic APIs

There will be two new exceptions:

public class RetryableException extends RuntimeException {
  ...
}
 
public class ServiceUnavailableException extends RetryableException {
  ...
}

There will also be preferences and runtime arguments that can be set, which correspond directly to the retry policy properties that are set programmatically.

Deprecated Programmatic APIs

No programmatic APIs will be deprecated

New REST APIs

No new REST APIs will be introduced

Deprecated REST API

No REST APIs will be deprecated

CLI Impact or Changes

• None

UI Impact or Changes

• None

Security Impact 

CDAP should make sure tokens are handled correctly if Kerberos ever does down

Impact on Infrastructure Outages 

Should make CDAP resilient to infrastructure outages

Test Scenarios

It is difficult to test all possible scenarios. A few are listed below and more will be added. It would be good if we could run the long running tests in combination with a chaos monkey.

Releases

Release 4.1.0

Release 4.2.0

Related Work

Future work